We’ll need to do a quick partition check before continuing. Place a checkmark next to that drive and click the “Edit” button to the right of it. Just make sure you choose the right one, as this will erase anything currently on that drive! It will likely be the big, empty one (if the drive has never been used before). Make sure you’re selecting the correct drive! It should say “C:” somewhere on one of the partitions.Ĭhoosing your target drive should be obvious. We want to clone the entire disk, these partitions included, so check the box next to the disk’s name (in our case, “Hard Disk 2” and click Next. Our system drive has three partitions: a small boot partition in the front, our main system partition in the middle, and a small recovery partition at the end.
Once you have installed the EaseUS application, go ahead and run it, then choose “Clone” in the upper-right corner. With your hard drives plugged in and ready to go, it’s time to move on to the big show.
#EASEUS DISK COPY SATA HOW TO#
How to Clone Your Hard Drive with EaseUS Todo Backup A clean house is a happy house (or hard drive, as the case may be). Since you’re doing some housekeeping anyway, this may also be a good time to delete any files you don’t need. RELATED: 7 Ways To Free Up Hard Disk Space On Windows Burn that CD and print that article-having it on hand will save you the hassle of finding another computer to create the boot CD on if you need it. Follow these instructions for Windows 7, and these instructions for Windows 8 or 10. Don’t forget to print off a copy of our guide to repairing the bootloader so you’re ready to fix it if you need to. On the off chance that your Master Boot Record gets corrupted, you’ll be able to pop in the Windows repair disc and fix it in a matter of minutes.
#EASEUS DISK COPY SATA FULL#
Check out our guide to backing up your computer, and make sure you have a full backup of your important data before continuing.
#EASEUS DISK COPY SATA INSTALL#
Its free version has all the features we need to accomplish the task in front of us, so download the free version and install it like you would any other Windows program. (2.5″ drives will not need this.) You can also install your new drive in an external hard drive enclosure before you start the migration process, though that’s a bit more time consuming. If you’re using a laptop, however, this usually isn’t possible, so you’ll need to buy something like a SATA-to-USB cable (shown right), which will let you connect a hard drive to your laptop via USB. If you’re upgrading a mechanical 3.5″ hard drive with spinning platters, and you want to use a SATA-to-USB wire, it will need to have an external power source. Something like this model should be more than enough to accommodate any kind of drive you throw at it. If you have a desktop computer, then you can usually just install your new hard drive alongside your old hard drive in the same machine to clone it. A way to connect both hard drives to your computer.Before you begin, you’ll of course need your new hard drive, but there are a few other things as well:
0 kommentar(er)
